Installation Instructions
ELECTRONIC CC
- Constant Voltage Phase + 0-10V Dim
- Constant Voltage + Aux Out
- Constant Voltage Phase Dim Only
- New! Constant Voltage Wireless Ready
- Constant Current 0-10V Dim
- Multi-Channel Solutions
- New! Constant Voltage DMX & DALI-2
AltaDrive
- Dim-To-Dark; dims to 0.1% minimum
- Uses pulse width modulation (PWM) to dim output
- 15VDC auxiliary output
VersaDrive 0-10V
- 1% min. dimming
- Uses pulse width modulation (PWM) to dim output
- 22VDC auxiliary output
AltaDrive
- Dim-To-Dark; dims to 0.1% minimum
- Uses pulse width modulation (PWM) to dim output
- 15VDC auxiliary output
VersaDrive 96 + Aux Out
- 1% Dimming
- 22VDC Aux Out for sensors that operate between 12V and 22VDC
- Uses PWM to dim output
VersaDrive 0-10V
- 1% min. dimming
- Uses pulse width modulation (PWM) to dim output
- 22VDC auxiliary output
VersaDrive Wireless Ready Lutron® Vive
- Integrated Lutron Vive solution
- Dims to 1% minimum
- Wall controls available in wide variety of styles
VersaDrive Wireless Ready Casambi
- Wireless-ready driver solution provides adaptable, labor-saving installations
- Compatible with Casambi controls ecosystem
VersaDrive 96 + Aux Out
- 1% Dimming
- 22VDC Aux Out for sensors that operate between 12V and 22VDC
- Uses PWM to dim output
JB-Series VersaDrive Wireless Ready
- 22VDC Aux Out for sensors that operate between 12V and 22VDC
- Lutron AWN factory installed, or field install
- Compatible with any auxiliary powered wireless nodes
JB-Series
- Drivers installed and prewired for large installations
- Can be recessed into finished walls for clean installation
EZJ-Box Series
- Ready-to-install drivers and junction box
- Covered enclosure for professional appearance
JB-Series – DALI-2
- DALI-2 DT6 controllers and drivers installed and prewired
- Up to 6 zones x 96W Class 2